Texas Instruments 3000 WinSX - Manual (Page 77)

Accessing the Setup Program
q Press the F5 key to set all items to the factory default and remain in the
Setup Program. This also automatically sets the Hard Disk type in the
Setup Program to the type of hard disk installed in your computer.
q Press the F6 key to discard any changes you may have made and return
to MS-DOS without updating.
Exiting the Windows-Based Setup Program
When you have completed your Setup Program settings, click on the word File on the
menu bar (or press the Alt-F keys) and then click on the word Exit. If you have made any
changes to the Setup Program paramters, Windows displays an exit menu at which you
can click on the three buttons to save, not save, or cancel the exit request and return to the
Setup menu. Windows returns to the Notebook menu unless you click on the cancel
option.
Each item on the Setup Program menus is described on the following pages.
4-6 Customizing Your Computer