Texas Instruments 3000 WinSX - Manual (Page 63)

TravelPoint Pointing Device
The compact, lightweight TravelPoint pointing device furnished with your new
TravelMate 3000 WinSX was developed as a mouse-like device to use in the palm of your
hand rather than rolling it around on a flat surface.
You also can attach the TravelPoint holder to the right side of the TravelMate 3000
WinSX and place the TravelPoint in the holder for use as a fixed pointer. TravelPoint
also is convenient to use for stand-up presentations and lectures, requiring only your
thumb for operation.
Installing TravelPoint
Install TravelPoint on your computer as follows.
1. Turn off the computer and disconnect the AC Adapter from the rear of
the computer.
Note: You can connect TravelPoint to the computer while power is on, but you then
must press the Ctrl-Alt-Del keys (warm start) or cycle power so the computer recognizes
TravelPoint's presence.
2. Connect the TravelPoint cable connector (with the flat side up) to the
round, six-pin mini-DIN connector on the computer's left side panel
shown below.
3-22 Getting Started