Texas Instruments 3000 WinSX - Manual (Page 74)

Accessing the Setup Program
You can customize many computer operating parameters so that your Texas Instruments
TravelMate 3000 WinSX Notebook Computer always powers up with your settings. You
can access any of the three Setup Programs to specify hardware and software
configurations. The Setup Program factory default settings are satisfactory for most
working environments and applications, but you can select the settings best for your
operating environment.
The program is divided into three pages: the first page lists system operating options; the
second page covers user features; and the third page lists external communication
parameters.
You can press the F1 key to get context-sensitive help displays for each Setup Program
page.
Disk-Based Setup Program
One Setup Program is resident on the hard disk under the UTILS directory. You should
use this disk-based Setup Program in almost all cases.
You can access the hard disk-based Setup Program one of two ways: At the MS-DOS C:\>
prompt, press the Fn-Esc (Set Up) keys. This executes the SET-UP command in the
UTILS directory and displays the first Setup Program menu page.
You also can access this Setup Program by typing at the MS-DOS C:\> prompt
SET_UP
and pressing the Enter key. The program loads and displays the first page of the Setup
Program.
Customizing Your Computer 4-3