Tyan Computer Transport GX21 B2735 - Manual (Page 27)

2.2 Installing motherboard components
Chapter 2: Setting up 19
4. Place the CPU in the CPU socket, ensuring that pin 1 is
located as shown in the following illustration.
5. Press the CPU locking lever back down to secure the
CPU in the socket.
6. Repeat steps three to five for the second CPU.
7. Apply thermal grease to the top of the CPUs and place
the CPU heatsinks on the CPUs.
8. Tighten the four screws to secure the heatsinks in place
as shown below.
Note: CPU heatsinks must be removed to
install or remove memory modules.
pin 1