Tyan Computer Transport GX21 B2735 - Manual (Page 56)

3.4 Replacing the floppy disk drive
48 Chapter 3: Replacing pre-installed components
3.4.2 Replacing the floppy disk drive
(B2735G21S4H/B2735G21U4H).
Follow these instructions to replace the slim floppy disk drive
in your B2735G21U4H or B2735G21S4H system.
1. Remove the chassis cover as described in section 2.2.1
Removing the chassis cover
2. Remove the ribbon cable from the back of the slim floppy
disk drive.
Note: The slim floppy disk drive uses a sin-
gle ribbon cable that provides it with both
power and data. To remove the ribbon cable
you must operate the release mechanism as
shown below.
3. Remove the two screws that secure the floppy disk
bracket to the chassis and lift it free.