Appendix, Turn on or reboot your system, Bios – Tyan Computer Transport GX21 B2735 User Manual

Page 69

Advertising
background image

61

Appendix

BIOS

Introduction

Your Transport GX21 (B2735) system includes a powerful
Tiger i7501R S2735 motherboard with AMI BIOS v8.0 on 4
MB flash ROM.

The BIOS is the motherboard’s basic input/output system.
The BIOS contains all the settings required to control the key-
board, display, disk drives, serial communications, and a
number of miscellaneous functions. This section of the
appendix describes the various BIOS settings that can be
used to configure your system.

BIOS setup utility

With the BIOS setup utility, you can modify BIOS settings and
control the features of your system. The setup utility uses a
number of menus.

Note:

All menus shown in this section are

based on a typical system. The actual menus
displayed on your screen may look different
depending on the hardware and features
installed.

To start the BIOS setup utility:

1. Turn on or reboot your system.

2. Press <Del> during POST (F4 on remote console) to

start the BIOS setup utility

Advertising