Tyan Computer Transport GX21 B2735 - Manual (Page 28)

2.2 Installing motherboard components
20 Chapter 2: Setting up
2.2.3 Installing memory
Follow the instructions in this section to install memory mod-
ules in your Transport GX21 (B2735) system.
1. Remove the chassis cover as described n section 2.2.1
Removing the chassis cover.
2. Locate the memory slots on the motherboard.
3. Press the memory slot locking levers in the direction of
the arrows as shown below.
Note:
It is not possible to move the mem-
ory slot locking levers without first removing
the CPU heatsinks.
4. Align the memory module with the slot. The module will fit
only one way in the slot. Ensure that indentations in the
memory module line up with corresponding notches in
the memory slot.