Tyan Computer Transport GX21 B2735 - Manual (Page 78)

70
IDE configuration submenu
Feature Option Description
IDE Configuration
IDE Legacy Con-
figuration Disabled
P-ATA only
S-ATA only
P-ATA & S-ATA Select combination you wish to
use. Note, only 4 IDE drives
can be used at one time, no
matter what the combination.
S-ATA Running
Enhanced Mode Yes
No
P-ATA Channel
Selection Primary
Secondary
Both
S-ATA Ports Def-
inition P0-3rd/P1-4th
P0-4th/P1-3rd
Configure S-ATA
as RAID No
Yes
S-ATA port 0/1
Master
S-ATA port 0/1
Slave
Both
Primary
Secondary
Disabled While entering setup, BIOS
auto detects the presence of
IDE devices. This displays the
status of auto detection of IDE
devices.
Primary/Second-
ary Master
Primary/Second-
ary Slave
Auto
User
ATAPI Removable
CD-ROM
None Auto - To determine the IDE
drive type by system BIOS
User - To set IDE drive type by
user
ATAPI Removable - Read/write
media (e.g... IDE zip)
CD-ROM - Readable CD-ROM
drive
Hard Disk Write
protect Disabled
Enabled This option protects the first
sector of the IDE HDD from
being written
IDE Detect Time
Out (Sec) 0, 5, 10,15,..35 Configure the time (in sec-
onds) before the BIOS times
out when detecting an IDE
device