4 rack mounting – Tyan Computer Transport GX21 B2735 User Manual
Page 42
2.4 Rack mounting
34
Chapter 2: Setting up
2.4
Rack mounting
Follow these instructions to mount the Transport GX21
(B2735) into an industry standard 19" rack.
Note:
Before mounting the
Transport GX21 in a rack, ensure that all
internal components have been installed and
that the unit has been fully tested. Mainte-
nance can be performed on the unit while in
a rack but it is preferable to install the device
in a fully operational condition.
1. Screw the mounting ears to the Transport GX21 as
shown using 4 screws from the supplied nuts, screws
and washers kit.
2. Screw the sliding rail mounting brackets to the sliding
rails as shown, using the short black screws from the
supplied nuts, screws and washers kit.
Note:
Ensure that the brackets with the cut
away section (to accommodate the handles