Tyan Computer Transport GX21 B2735 - Manual (Page 81)

73
Floppy configuration submenu
Super I/O configuration submenu
You can use this screen to change the configuration of Super
I/O. Use the up and down <Arrow> keys to select an item.
Use the <Plus> and <Minus> keys to change the value of the
selected option.
Super I/O configuration submenu
Features Option Description
Floppy Configuration
Floppy A Disabled
360 KB 5 1/4”
1.2 MB 5 1/4”
720 KB 3 1/2”
1.44 MB 3 1/2”
2.88 MB 3 1/2” This setting defines the type of
floppy drive installed in the sys-
tem
Floppy B Disabled
360 KB 5 1/4”
1.2 MB 5 1/4”
720 KB 3 1/2”
1.44 MB 3 1/2”
2.88 MB 3 1/2” This setting defines the type of
floppy drive installed in the sys-
tem
Main Advanced PCI/PnP Boot Security Chipset Exit
Win627 Super I/O chipset Use [Enter], [TAB] or
[SHIFT_TAB] to select
a field
Use [+] or [-] to config-
ure system time.
Select Screen
Select item
+/- Change option
Tab Select field
F1 General Help
F10 Save and Exit
ESC Exit
Onboard Floppy Controller
Serial Port1 Address
Serial Port2 Address
Serial Port2 Mode
Parallel Port Address
Parallel Port Mode
Parallel Port IRQ
[Enabled]
[3F8/IRQ4]
{Disabled]
[Disabled]
[Disabled]
[Normal]
[IRQ7]