Tyan Computer Barebone System B4881V50S4H - Manual (Page 21)

2.2 Installing motherboard components
Chapter 2: Setting up 13
2.2 Installing motherboard components
This section describes how to install CPUs, memory mod-
ules, and expansion cards.
2.2.1 Removing the chassis cover
Follow these instructions to remove the chassis cover. This
step is required before any other procedures in this chapter
can be undertaken.
1. Press the two blue buttons on the release catches and lift
the catches.
The chassis lid slides back slightly.
2. Lift the lid free from the chassis.
Refitting the chassis cover is a reverse of the removal pro-
cess. Place the lid on the chassis and push it forward into
place before tightening the screw on the rear of the unit.