Slide the new drive into place until it locks, Drive housing release button, Connect power and data cables to the new drive – Tyan Computer Barebone System B4881V50S4H User Manual
Page 33
Advertising
2.3 Installing hard drives
Chapter 2: Setting up
25
3. Remove the two screws holding the cradle locking bar in
place and remove the bar.
4. Lift the drive housing to the vertical position as shown.
5. Slide the new drive into place until it locks.
6. Press the drive housing release button and lower the
drive housing back into place.
7. Connect power and data cables to the new drive.
Drive housing
release button
Advertising