Tyan Computer Barebone System B4881V50S4H - Manual (Page 30)

2.3 Installing hard drives
22 Chapter 2: Setting up
4. Fix the storage backplane to the drive housing using six
screws.
5. Press the drive housing release button and lower the
drive housing back into place.
6. Connect power and data cables to the backplane.
Note:
The B4881V50S4H is not shipped with a
SCSI controller as standard. If you want to
add a SCSI backplane, a PCI-X SCSI con-
troller must also be added. See “Installing
PCI-X cards” on page 20.
Drive housing
release button