Tyan Computer Barebone System B4881V50S4H - Manual (Page 47)

3.3 Replacing the slim CD-ROM drive
Chapter 3: Replacing pre-installed components 39
2. Remove the power and data cables from the CD-ROM
drive.
3. Press the release catch that secures the CD-ROM drive
and slide the CD-ROM drive from the front of the chassis.
4. Remove the four screws that secure the CD-ROM drive
in the cradle and remove the old unit.
5. Remove the two screws that hold the CD-ROM back-
plane to the CD-ROM drive, and remove back plane.