Tyan Computer Barebone System B4881V50S4H - Manual (Page 34)

2.4 Rack mounting
26 Chapter 2: Setting up
2.4 Rack mounting
The B4881V50S4H can be mounted in a standard rack using
the rail assembly supplied.
1. Remove the thin, center rail from each sliding rail set.
2. Take the remaining rails and attach the short L sections
to them using the two M4L4-H2.4 screws and washers -
4.2L10-0.8.
Note:
Measure the depth of the cabinet and
make the rails exactly the right length to
fit. The L sections have long slits in them
to allow them to be fixed to the other part
of the rails in various positions.
Screws Required Location
6 hex head #6-32-L6 Cradle locking bar and HDD rails