TANDBERG S3.1 - Manual (Page 38)

38
D13898.06
MAY 2008
TANDBERG CONTENT SERVER
ADMINISTRATOR GUIDE
Table of
Contents
Introduction Installation Quick Setup
TCS
Administration
Backing up and
Restoring
Administrator
Settings
Conference
Setup
View
Conferences
Appendices
Site Settings
System Name . Enter the name for the
Content Server.
Restart Service . This will terminate calls
that are currently live (that is, the calls
will be ended and conferences will not
be available for on demand playback).
Before restarting the service, check if
there are live conferences in progress in
the
Live Conferences page or check the
call status on the LCD panel of the unit.
The
Site Settings page will also display
a warning if calls are in progress. If you
click on the
Restart Service button while
calls are in progress, you will be asked
to confirm if you want to go ahead with
the restart.
System Information
The System Name is used in the
TANDBERG Management Suite to
identify added Content Servers. It
is not the same as the S2 “System
Name” as that was the H.323 ID.