TANDBERG S3.1 - Manual (Page 91)

91
D13898.06
MAY 2008
TANDBERG CONTENT SERVER
ADMINISTRATOR GUIDE
Table of
Contents
Introduction Installation Quick Setup
TCS
Administration
Backing up and
Restoring
Administrator
Settings
Conference
Setup
View
Conferences
Appendices
Ending the Call

You will see the Call Status change to Ending Call and then the conference will be listed in the Recorded Conferences list and the Pending
Conferences list if further outputs need to be created.
Ending the Call from the Web Interface

To end a call from the Content Server Interface, first list the Live Conferences from the View
Conferences menu. Click the Edit link for the conference that you want to end.

Click on the End Call button at either the
top or the bottom of the screen.
There are two ways of ending a call:
You can end a live call by hanging up the call at
the endpoint.
You can end the call from the Web Interface
of the Content Server. This method will give
you information about the call, after it has
completed, e.g. Thumbnails, Permissions and
Metadata and enable editing of the conference
for viewing.
The Recorded Conferences list will
display a small icon on the right
hand side of the screen indicating
that this conference has more outputs to be
transcoded. The icon will be to the left of
Edit ,
Download and Play . What icons are displayed
depends on the Template used in the call.
Creating Conferences (continued)
About Ending Calls