TANDBERG S3.1 - Manual (Page 71)

71
D13898.06
MAY 2008
TANDBERG CONTENT SERVER
ADMINISTRATOR GUIDE
Table of
Contents
Introduction Installation Quick Setup
TCS
Administration
Backing up and
Restoring
Administrator
Settings
Conference
Setup
View
Conferences
Appendices
LIVE STREAMING SETTINGS
Server Type.
Select either Server G2 or Server
90.
Port. Enter the port to be used for live
streaming off your Real Media server.
Broadcast Point. Enter the broadcast point for
the server. If you have not manually changed it
on your external server, the broadcast mount
point for Server G2 is “encoder”, and for Server
90, “broadcast”.
User Name. Enter the user name to be used for
authentication with your streaming server.
Password. Enter the password to be used for
authentication with your streaming server.
Password Confirm. Enter the password again
to confirm.
The Real Media Streaming Settings Options
Adding Real Media Streaming Server
Configuring Real Media Server
Click on the Add Real Media Streaming Server
to configure an external server for streaming
Real Media.
SERVER SETTINGS
Name.
Enter a descriptive name for the server.
The server name will be used in a template
when selecting a media server.
Server Address. Enter the DNS name or the IP
address of the server.
Support Live Streaming. Select if the server is
to support live streaming. Once selected the
Media Server will be available to choose in the
Live Media Server Settings for templates that
stream Real Media.
Support On Demand. Select if the server is to
support on demand streaming. Once selected
the Media Server will be available to choose
in the On Demand Media Server Settings for
templates that stream Real Media.
LIVE URLs
Use default live URLs.
Choose this option to
use the default live URL for this media server.
Use alternate live URLs. Choose this option to
supply your own URLs for live streaming. Enter
the URLs for Main and Dual video streams and
choose whether you wish the filename to be
appended to the alternate URL.