Configuring quicktime or darwin streaming server, Live unicast streaming settings, Live multicast streaming settings – TANDBERG S3.1 User Manual

Page 69

Advertising
background image

69

D13898.06
MAY 2008

TANDBERG

CONTENT SERVER

ADMINISTRATOR GUIDE

Table of

Contents

Introduction

Installation

Quick Setup

TCS

Administration

Backing up and

Restoring

Administrator

Settings

Conference

Setup

View

Conferences

Appendices

LIVE URLs
Use default live URLs.

Choose this option to

use the default live URL for this media server.

Use alternate live URLs.

Choose this option to

supply your own URLs for live streaming. Enter
the URLs for

Main

and

Dual

video streams and

choose whether you wish the filename (in this
case the sdp filename) to be appended to the
alternate URL.

Live Unicast Streaming Settings

Configuring QuickTime or Darwin Streaming Server

LIVE UNICAST SETTINGS
Streaming port range start.

Specify the start

port for your streaming port range, e.g. 30000.
The start port must be an even number. The
Content Server will use the streaming start
port + 30 to be used for streaming live calls,
eg. a port range from 30000 to 30030. Ensure
that you select ports that are NOT being used
by the Content Server (see the Appendix for a
list of ports used by the Content Server).

User Name.

Enter the user name to be used for

authentication with your streaming server.

Password.

Enter the password to be used for

authentication with your streaming server.

Password Confirm.

Enter the password again

to confirm.

TTL.

Choose the multicast time to live (TTL)

threshold. The “multicast TTL” tells the network
how far multicast packets should be allowed
to travel across the network. The default
threshold is LAN (TTL=32). The value “Subnet”
(i.e. TTL=1) means that packets do not pass
the first network router. This setting should
mean a multicast stream is viewable on any
network, even those not enabled for multicast,
where the client is on the same subnet as the
Content Server. The efficacy of higher values
WAN (64), Internet (128), Unrestricted (255)
depends on the configuration of the network

Live Multicast Streaming Settings

LIVE UNICAST SETTINGS
Multicast IP Address.

Enter a destination

multicast address. The range of allowable
IP Addresses is from 224.0.0.1 to
239.255.255.255. The multicast address will
depend on the configuration of the network.

Streaming port range start.

Enter a port

number for the start of the Live Streaming Port
Range. The port range must be from 10000 to
65000 and must be an even number.

Advertising