Source / destination, Encryption (secure conference, Duration – TANDBERG D13187-03 User Manual

Page 18

Advertising
background image

18

TANDBERG Gateway

Using the Gateway

E

NABLING

ENCRYPTION

WILL

REDUCE

THE

CAPACITY

OF

THE

GATEWAY

.

NOTE

Source / Destination

Source shows the Status of the incoming call to the gateway, the number and which network the incoming call is
using.

Destination shows the Status of the outgoing call from the gateway, the number and which network the outgoing
call is using.

Idle

No active call, call been disconnected.

Alerting

Call is being connected.

Connected Call is connected.

Establ out

Gateway is calling out to destination.

Clear out

Call is being disconnected.

Number

ISDN or IP number.

ISDN

Call connected is using the H.320 protocol over ISDN.

IP/H.323

Call connected is using the H.323 protocol over IP.

Encryption (Secure conference

TF

)

The gateway supports Secure Conference DES and AES.

The open padlock symbol indicates that the encryption is being established.

The single padlock symbol indicates that DES (56 bit) encryption is used.

The double padlock symbol indicates that AES (128 bit) encryption is used.

Indicates that the call is not encrypted.

Duration

Shows the length of the current call.

Advertising