TANDBERG D13187-03 - Manual (Page 55)

TANDBERG Gateway
55
Configure the Gateway
Max. Rate
The call rate for outgoing calls will automatically be determined by the call rate used by the endpoint. Use this
setting to restrict the call rate for outgoing calls.
Possible configurations are Telephone, 64 kbps, 128 kbps, 192 kbps, 256 kbps, 320 kbps, 384 kbps, 512 kbps,
768 kbps, 1152 kbps, 1472 kbps and 1920 kbps.
We recommend having one service prefix for Video and one for Telephone calls unless Q.931 Speech signaling on
IP/H.323 is supported by the endpoint.
ISDN Prefix
Can be used as an option to pick specific carriers or “outside”-lines and is automatically added to the ISDN
number.
Restrict
Select ‘Restrict’ if the H.323 Service always should force restricted (56k) ISDN calls. If ‘Restrict’ is not selected,
the gateway will dial an unrestricted call and downspeed to 56 kbps if necessary.
Create New
When Description, Service, Max. Rate, ISDN Prefix, Restrict (56k) has been entered, press ‘Create New’ to
activate the new H.323 Service.
Save Changes
To modify a H.323 Service, click on it, change the necessary settings and press ‘Save Changes’ to activate the
new settings.
Clear
Press ‘Clear’ to empty any entries done under Entry.
Save
Press ‘Save’ to activate the new settings.