TANDBERG D13187-03 User Manual
Page 44
44
TANDBERG Gateway
Configure the Gateway
QoS Mode Configuration
Diffserv is used to define which priority audio, video, data and signaling packets should have in an IP network. The
priority ranges from 0 to 63 for each type of packets.
Precedence is used to define which priority audio, video, data and signaling should have in the network. The
higher the number, the higher the priority. The priority ranges from 0 (off) - 7 for each type of packets.
In addition to Precedence, Type of Service can be used and enables the user to define what type of connection
that should be chosen for the IP traffic. Helps a router select a routing path when multiple paths are available.
Off
Service not active.
Min. Delay
Will choose a route where minimum delay is prioritized.
Max. Throughput Will choose the route with highest bandwidth.
Max. Reliable
Will choose the route with highest reliability.
Min. Cost
Will choose the route with minimum cost.