Bridging ip islands – TANDBERG D13187-03 User Manual
Page 26
26
TANDBERG Gateway
Features
Bridging IP Islands
Organizations that uses IP based video conferencing internally in their LAN but not for external purposes can be
called “IP Islands”. If a user in one IP island wants to call another user in another IP island, both organizations
have to be connected with a Gateway. The TANDBERG Gateway can help the user to set up this type of call
automatically without the need of invoking touch tones under call setup.
To dial to a remote IP endpoint through two Gateways, the calling IP endpoint has to combine the dialed number
from:
•
A Service Prefix at the first Gateway,
•
The ISDN number of the second Gateway,
• One star character (“*”),
•
The extension address (E.164 alias) of the endpoint to dial.
Example:
• An H.323 Service prefix for outgoing video calls is defined as “0” (default).
• The second gateway has the ISDN number 67121212.
• The user wants to dial to an endpoint in the other network that has a E.164 alias 5012345.
• The user dials to “067121212*5012345”.
• The user will get displayed poster from the first, then from the second Gateway.
• Audio and video are transported through the gateway when the call is connected.
T
HE
SECOND
GATEWAY
MUST
HAVE
TCS-4
DIAL
-
IN
METHOD
ENABLED
: F
OR
INFORMATION
ABOUT
RESTRICTIONS
OF
THE
DIAL
STRING
,
SEE
THE
NOTE
IN
THE
PREVIOUS
SECTION
.
NOTE