TANDBERG D13187-03 User Manual
Page 43
TANDBERG Gateway
43
Configure the Gateway
Authentication Mode
Off
Register to the Gatekeeper without authentication.
Auto
Register to the Gatekeeper with H.235 authentication using ID/Password given below.
Authentication ID, Password
Enter the ID and password required to perform H.235 authentication at the Gatekeeper.
To register to a Gatekeeper that requires authentication, an NTP server has to be configured.
Quality of Service
The network must support Quality of Service for these settings to work.
RSVP
Off
No RSVP Quality of Service is initiated for any connections.
Auto
Resource Reservation Protocol enables the gateway to request the optimal amount of bandwidth for
the duration of an IP video call.
QoS Mode
Off
No QoS is used
Diffserv
Diffserv QoS method is used. Please see ‘QoS Mode Configuration’ for details.
Precedence
IP Precedence QoS method is used. Please see ‘QoS Mode Configuration’ for details.
NOTE
T
HE
GATEWAY
MAY
BE
REGISTERED
WITH
A
B
ORDER
C
ONTROLLER
IN
THE
SAME
WAY
IT
IS
REGISTERED
WITH
A
G
ATEKEEPER
. U
SE
THE
IP
ADDRESS
OF
THE
B
ORDER
C
ONTROLLER
IN
THE
G
ATEKEEPER
ADDRESS
FIELD
.
Gatekeeper IP Address
Enter the Gatekeeper IP Address that the gateway should register to.