TANDBERG D13187-03 - Manual (Page 47)

TANDBERG Gateway
47
Configure the Gateway
Miscellaneous Configuration
To configure the miscellaneous settings on the gateway, open ‘Misc’ as shown in the figure below.
Configuration
To change the system name of the gateway, enter the new system name in the ‘System Name’.
Password
To change the system password of the gateway, enter the new password in the ‘New Administrator Password’.
To delete the existing password, select ‘Delete Password’.
Services
The different IP services on the gateway - Telnet, Telnet Challenge, HTTP, HTTPS, SNMP and FTP can be
independently disabled to prevent access to the system.
In addition, the SNMP Service Read Only/Traps Only will make it possible to read SNMP messages in addition to
enable/disable SNMP.