Tyco Electronics MM102014V1 - Manual (Page 15)

MM102014V1, Rev. G
Figure 3-4: CH-103 Control Head Rear Panel
3.11 V-TAC REAR PANEL
As shown in Figure 3-5, the V-TAC consists of an RF Combiner and two radio units, assembled to allow
operation from a single antenna. One of the radio units, the Mobile Radio Unit (MRU), is configured as a
mobile radio. The second radio unit, the VRB, is configured to operate with a base station frequency plan.
Each unit requires connection to a DC power source. All cable connections are color coded on the rear
panel of the V-TAC components. Refer to Installation Manual MM102094V1 for specific connection
details.
Figure 3-5: V-TAC Rear Panel
15