Tyco Electronics MM102014V1 - Manual (Page 35)

MM102014V1, Rev. G
3. Press the Select button to unlock the talk group. The cursor (“<”) next to the name of the talk group
disappears. The dwell display appears as soon as the radio acknowledges the selection.
5.12.3 Caution Regarding Profile Changes
A talk group’s lock out status does not survive a change of profile. If after locking out talk groups in the
current profile and then selecting a new profile, all talk groups that were previously locked are
automatically unlocked.
Compare options before changing to another profile. If the user’s goal can be achieved by temporarily
assigning priority talk group status to a talk group, it could be possible to avoid having to lock out the
same talk groups again in a new profile. See Section 5.13.2 for additional information.
5.13 SCAN MODE
Three scanning modes are available for the radio, but only one can be active at any time. Changing the
scanning mode changes the way the radio scans voice calls for all of profiles in the radio personality, no
matter which profile is or becomes active.
As described in Table 5-1, the choice of scanning mode broadens or narrows the span of communications
with all the talk groups in the radio’s profiles, but does not affect interaction with the talk groups.
35