Tyco Electronics MM102014V1 - Manual (Page 32)

MM102014V1, Rev. G
Figure 5-3: Profile Menu
5.10 CHECKING OR CHANGING THE SELECTED TALK GROUP
Each profile stored in the radio can have up to sixteen (16) talk groups. One talk group within the
currently active profile is set as the “selected talk group.” For the radio user, the selected talk group is
typically the focus of most voice transmissions and receptions. There are two ways to change the selected
talk group:
First Method:
1. Use the ▲ and ▼ buttons to scroll through the menu until “TalkGrpMenu” appears on the bottom
line of the display. The currently selected talk group appears in the top line of the display. For
example, “Police1” as shown in Figure 5-4.
2. Use the ◄ or ► buttons to scroll through the available list of talk groups in the active profile. This
list is determined by the OpenSky network administrator.
OR
Second Method:
1. From the dwell display, press the  or  buttons to scroll through the available list of talk groups in
the active profile.
Figure 5-4: Talk Group Menu
5.11 INTERCOM MODE
The optional intercom mode gives users at multiple control heads connected to the same radio the ability
communicate with each other without transmitting over-the-air. Turn intercom mode on and off using the
“INTERCOM” menu as follows:
32