Tyco Electronics MM102014V1 - Manual (Page 19)

MM102014V1, Rev. G
19
4.2.5 Dwell Display
When not engaged in menu selection, the 2-line display defaults to the user-defined default display,
known as the “dwell display.” The top line indicates the currently selected talk group. The bottom line
indicates the currently selected profile, received talk group/caller ID/alias
5 , V-TAC mode, V-TAC
channel, or radio channel. To set one of these bottom line options, press the Select button from the dwell
display.
Table 4-2: Display Parts and Functions
COMPONENT FUNCTION
Network
Connectivity
(OTP Mode
only)
Icon When lit, the network connectivity icon
indicates a network connection.
VOLUME Icon Indicates current speaker volume setting
chosen by the user. Note that a momentary
numerical representation will also be shown
within the display while the volume is being
adjusted.
TWO TEXT
LINES During a menu session, the display’s bottom
line responds to
 (up arrow) and  (down
arrow) buttons. It indicates the current menu.
For example, the Talk Group Menu is selected
in Figure 4-3.
The display’s top line responds to the
 (left
arrow) and  (right arrow) buttons. It indicates
the options within the current menu. For
example, “Police1” is the currently selected
talk group in Figure 4-3.
5 Alias is a logical ID name such as “J_Smith.” The name corresponds to a user ID such as 003-542-0001. Alias is limited to
eight (8) characters.