Tyco Electronics MM102014V1 - Manual (Page 25)

MM102014V1, Rev. G
4.6 CHANGE OPERATING MODE
Perform the following procedure to change the operating mode:
1. Press the ▲ and ▼ buttons to cycle through the menu until the “Mode Menu” appears in the bottom line
of the display.
2. Then use the ◄ or ► buttons to choose an available mode.
3. Press Select.
4. Confirm (Y/N) by pressing ◄ or ► button.
5. Press Select again. The dwell display will appear when the radio begins using the new setting.
25