Texas Instruments TMS3320C5515 - Manual (Page 59)

www.ti.com System Configuration and Control
1.7.2.4 Die ID Register 3 (DIEIDR3[15:0]) [1C43h]
The die ID register 3 (DIEIDR3) is shown in Figure 1-30 and described in Table 1-39 .
Figure 1-30. Die ID Register 3 (DIEIDR3[15:0]) [1C43h]
15 12 11 0
DesignRev DIEID3
R R
LEGEND: R = Read only; -n = value after reset
Table 1-39. Die ID Register 3 (DIEIDR3[15:0]) Field Descriptions
Bit Field Value Description
15-12 DesignRev 0-Fh Silicon Revision
0 Silicon 2.0
11-0 DIEID3 0-FFFFh Die ID bits.
1.7.2.5 Die ID Register 4 (DIEIDR4) [1C44h]
The die ID register 4 (DIEIDR4) is shown in Figure 1-31 and described in Table 1-40 .
Figure 1-31. Die ID Register 4 (DIEIDR4) [1C44h]
15 6 5 0
Reserved DIEID4
R R
LEGEND: R = Read only; -n = value after reset
Table 1-40. Die ID Register 4 (DIEIDR4) Field Descriptions
Bit Field Value Description
15-6 Reserved 0 Reserved.
5-0 DIEID4 0-3Fh Die ID bits.
1.7.2.6 Die ID Register 5 (DIEIDR5) [1C45h]
The die ID register 5 (DIEIDR5) is shown in Figure 1-32 and described in Table 1-41 .
Figure 1-32. Die ID Register 5 (DIEIDR5) [1C45h]
15 0
Reserved
R
LEGEND: R = Read only; -n = value after reset
Table 1-41. Die ID Register 5 (DIEIDR5) Field Descriptions
Bit Field Value Description
15-0 Reserved 0 Reserved.
59 SPRUFX5A – October 2010 – Revised November 2010 System Control
Submit Documentation Feedback
Copyright © 2010, Texas Instruments Incorporated