Tunturi C35 - Manual (Page 4)

4
OWNER'S MANUAL
•
C35
REAR SUPPORT
Push the stand feet to the rear support ends and attach
the rear support to the main frame with two bolts,
washers and locking sleeves.
FRONT FRAME TUBE
Remove the rubber band from around meter cable
coming from the frame tube. Attach the meter cable
to the connector coming from the front frame tube.
Push the front frame tube inside the frame tube: do not
damage the meter cable! Attach the front frame tube
tight to the frame with the washers and attachment
screws.
FOOTRESTS
Attach the footrests to the position of your choice on
the pedal shafts with two screws, two washers / screw
and locking nuts.
ARMS
Push the metal shaft through the bracket housing of
the left arm. Attach now the left arm to the front frame
tube by pushing the metal shaft through the opening in
the tube. Push the right arm on the shaft and lock it by
tightening a large washer, a locking sleeve and a screw to
the both ends of the shaft. Tighten the arms using two
Allen keys.
Tunturi_C35 4 7.1.2005, 15:24:42