Installation & grounding instructions – Thermador MBESLFTD User Manual

Page 8

Advertising
background image

8

Unpack oven, remove all packing material and examine the oven for any damage

such as dents, broken door latches or cracks in the door. Notify dealer immediately

if oven is damaged. Do not install if oven is damaged.
1. The oven must be placed on a flat, stable surface. Place the front surface of the

door three inches or more from the counter top edge to avoid accidental tipping

of the microwave oven during normal use. For proper operation, the oven must

have sufficient air flow. Allow 3Ćinches (7.6 cm) of space on both sides of the

oven and 1Ćinch (2.5 cm) of space on top of the oven.

D

Do not block air vents. If they are blocked during operation, the oven may be

overheated and damaged.

D

Do not place oven near a hot, damp surface such as a gas or electric range, or

dishwasher.

D

Do not operate oven when room humidity is excessive.

2. This oven is manufactured for household use only. It is not approved or tested for

mobile vehicle, marine, or commercial use.

See the Warranty. If you have any questions, contact the manufacturer".

Do not block air vents. If they are blocked during operation, the oven may overheat.

If the oven overheats, a thermal safety device will turn the oven off. The oven will

remain inoperable until it has cooled.

WARNING

Improper use of the grounding plug can result in a risk of

electric shock.

Consult a qualified electrician or service person if the grounding instructions are not

completely understood, or if doubt exists as to whether the appliance is properly

grounded. If it is necessary to use an extension cord, use only a three wire extension

cord that has a three prong polarized grounding plug, and a three slot receptacle

that will accept the plug on the appliance. The marked rating of the extension cord

should be equal to or greater than the electrical rating of the appliance.

This appliance must be grounded. In the event of an electrical short circuit,

grounding reduces the risk of electric shock by providing an escape wire for the

electric current. This appliance is equipped with a cord having a grounding wire with

a grounding plug. The plug must be plugged into an outlet that is properly installed

and grounded.

D

Plug into properly installed and grounded 3 prong outlet.

D

Do not remove ground prong.

D

Do not use an adapter.

INSTALLATION &

GROUNDING

INSTRUCTIONS

Examine Your Oven

Placement of Oven

Installation

ř

Grounding Instructions

Advertising