Trimble Outdoors SPSX51 - Manual (Page 114)

10 Specifications
112 SPSx51 Modular GPS Receivers User Guide
Electrical specifications
Feature Specification
Power
Internal
External
Integrated internal battery 7.4 V, 7800 mA-hr, Lithium-ion
Internal battery operates as a UPS in the event of external power source
failure
Internal battery will charge from external power source when input
voltage is >15 V
Integrated charging circuitry
Power input on Lemo 7-pin 0-shell is optimized for lead acid batteries with
a cut-off threshold of 10.5 V
Power input on the 26-pin D-sub connector is optimized for Trimble
Lithium-ion battery input (P/N 49400) with a cut-off threshold of 9.5 V
Power source supply (Internal/External) is hot-swap capable in the event of
power source removal or cut off
9.5 V to 28 V DC external power input with over-voltage protection
Receiver will automatically turn on when connected to external power
Power consumption 6 W, in rover mode with internal receive radio
8 W in base mode with internal transmit radio
Base station operation times on
internal battery
External radio
450 MHz 0.5 W systems
1
900 MHz 1.0 W systems
1 If your receiver has the 2.0 W upgrade, you will experience lesser battery performance compared to the 0.5 W
solution.
14 hours; varies with temperature
10 hours; varies with temperature
9 hours; varies with temperature
Rover operation time on
internal battery
450 MHz 2.0 W systems
900 MHz 1.0 W systems
12 hours; varies with temperature
12 hours; varies with temperature
Regulatory approvals FCC: Part 15 Subpart B (Class B Device) and Subpart C, Part 90
Industry Canada: ICES-003 (Class B Device), RSS-210, RSS-Gen, RSS-310,
RSS-119
R&TTE Directive: EN 301 489-1/-5/-17, EN 300 440, EN 300 328, EN 300 113,
EN 60950, EN 50371
ACMA: AS/NZS 4295 approval
CE mark compliance
C-tick mark compliance
UN ST/SG/AC.10.11/Rev. 3, Amend. 1 (Li-Ion Battery)
UN ST/SG/AC. 10/27/Add. 2 (Li-Ion Battery)
RoHS compliant (excludes receivers with an internal 900 MHz radio)
WEEE compliant