Trimble Outdoors SPSX51 - Manual (Page 73)

C H A P T E R
7
SPSx51 Modular GPS Receivers User Guide 71
Configuring the Receiver Settings
7
In this chapter:
Q Using the SCS900 Site Controller
software to configure the base
station, the rover, and the radios
Q Configuring the receiver to log
data for postprocessing
Q Configuring the receiver to use
specific settings when it is turned
on
Q Configuring Ethernet settings
Q Configuring the receiver using a
web browser
You can configure the SPS GPS receiver family in
a variety of ways. This chapter describes the
different configuration methods, and explains
when and why each method is used.
The SCS900 Site Controller software is likely to be
your main tool to set up and operate the receiver
on a daily basis. All necessary field configurations
are handled through the SCS900 software
running on a TSC2 or Trimble CU controller. For
more information, refer to the Trimble SCS900
Site Controller Software Office Guide.
The external software detailed in this chapter is
primarily used to update the receiver firmware
and to configure upgrades or radio channels.