Trimble Outdoors SPSX51 - Manual (Page 97)

SPSx51 Modular GPS Receivers User Guide 95
Configuring the Receiver Settings 7
Network Configuration menu
Use the Network Configuration menu to configure Ethernet settings, email alerts, PPP
connection, HTTP port, FTP port, and VFD port settings of the receiver. For
information on the Ethernet settings, see
Configuring Ethernet settings, page 74 .
The VFD port allows you to use the SPSx51 Remote Control application to view and
navigate the receiver through a mock display and keypad interface. To allow the
SPSx51 Remote Control to connect to the receiver, you need to enable the VFD port. To
do this, select Network Configuration / VFD.
This figure shows an example of the screen that appears when you select Network
Configuration / Ethernet.