Upgrading the receiver firmware – Trimble Outdoors SPSX51 User Manual
Page 163
A P P E N D I X
F
SPSx51 Modular GPS Receivers User Guide
161
Upgrading the Receiver Firmware
F
In this appendix:
Q
Q
Upgrading the receiver firmware
Q
Forcing the receiver into Monitor
mode
The GPS receiver is supplied with the latest
version of the receiver firmware already installed.
If a later version of the firmware becomes
available, use the WinFlash utility to upgrade the
firmware on your receiver.
You can also upgrade the receiver through the
web interface (see
Configuring the receiver using
). If your receiver has
access to the Internet, then whenever Trimble
releases new firmware your receiver will check
and display the new firmware version number in
the Web browser. You can then decide to install
the newer firmware from the Web browser.
from the Trimble website. Go to
and select the
link to the receiver that you need updates for and
then click Downloads.