Trimble Outdoors SPSX51 - Manual (Page 64)

6 Configuring the Receiver Using the Keypad and Display
62 SPSx51 Modular GPS Receivers User Guide
Button functions
Use the buttons on the front panel to turn the receiver on and off and to check or
change the receiver settings.
Power button operations
Press the Power button E to turn the receiver on and off. In addition, you can tap E
to return to the Home screen, or hold down E to perform the following operations:
Button Name Function
E
Power Turns the receiver on and off. See the next section.
F
Escape Returns to the previous screen or cancels changes being made on a
screen.
L
Enter Advances to the next screen or accepts changes made on a screen.
J
Up Moves the cursor between multiple fields on a screen or makes changes
to an editable field.
K
Down Moves the cursor between multiple fields on a screen or makes changes
to an editable field.
I
Left Moves the cursor between characters in a field that can be changed.
G
Right Moves the cursor between characters in a field that can be changed.
Press this button to enter Edit mode.
To … Hold the E
button for …
Notes
turn off the receiver two seconds The display shows a countdown timer. When the display goes
blank, release the
Power button.
clear the almanac,
ephemeris, and SV
information 15 seconds The display show a countdown timer. When the display goes
blank, continue to hold the
Power button. The display shows a
countdown time to clear the almanac and ephemeris. When
the counter reaches 0, release the
Power button.
reset the receiver to its
factory defaults and
the default application
file 35 seconds The display show a countdown timer. When the display goes
blank, continue to hold the
Power button. The display show a
countdown to clear the almanac and ephemeris. When the
counter reaches 0, continue to hold the
Power button. The
display indicates a countdown to resetting the receiver. When
the counter reaches 0, release the
Power button.
force the receiver to
power down at least 60
seconds If the reset method above does not work, use this method to
force the receiver to turn off. When the Power LED goes off,
release the Power button.