VTech IP8300 - Manual (Page 42)

www.vtechphones.com 37
Phone settings
From this menu you can change the following telephone settings: ringer
volume, keypad tone, color themes, handset name, handset screen contrast
or reset the telephone to its original settings.
Ringer volume
There are five volume levels on the handset. The same volume setting
is applied to the Home, VoIP and Intercom ringers. To adjust the ringer
volume:
Step 1: Press the
Menu softkey from the idle screen.
Step 2: Press the , , and/or NavKeys to choose Phone Settings
then press the Select softkey or center NavKey/SEL/ .
Step 3: Press the up or down NavKey or to choose Ringer Volume
then press the Change softkey or center NavKey/SEL/ . The
current ringer volume will be played.
Step 4: Press the up or down NavKey or to increase or decrease
the volume. The volume level will be shown on the screen as you
adjust it. A sample of the volume level will be played at the same
time. When the ringer volume is set to zero (no highlighted volume
bar is shown on the screen), no sample volume will be played.
Step 5: Press the Apply softkey or center NavKey/SEL/ to confirm,
and the ringer volume level will display on the Phone Settings
screen. If the ringer volume is set to zero, a ringer off icon will
be displayed on the idle screen.
Step 6: Press the Back softkey at anytime to return to previous screen.
Phone Settings
Select Back
Ringer Volume
Apply Back
Phone Settings
Change Back
Ringer Volume
Keypad Tone
on
Color Themes
Telephone operation