VTech IP8300 - Manual (Page 55)

www.vtechphones.com 50
Telephone operation
Set the date
Follow these steps to set the date:
Step 1: Press the
Menu softkey from the idle screen.
Step 2: Press the , , and/or NavKeys to choose Date and Time
then press the Select softkey or center NavKey/SEL/ .
Step 3: Press the up or down NavKey or to choose Date and press
the Options softkey.
Step 4: Press the up or down NavKey or to choose Set then press
the Select softkey or center NavKey/SEL/ . The Set date screen
will display.
Step 5: Press the left or right NavKey or to change the date format
between: MM/DD/YYYY, DD/MM/YYYY or YYYY/MM/DD.
Step 6: Press the down NavKey to move to next box to enter the date.
Step 7: Press the left or right NavKey or to move the cursor back and
forth inside the box, and use the dial pad to enter the date.
Step 8: Press the Apply softkey or center NavKey/SEL/ to confirm. The
date will be shown on the Date and Time screen and the main
idle screen. The screen will display Enter valid value! if you have
entered an incorrect information.
Step 9: Press the Back softkey to return to the previous screen.
Date and Time
Select Back
Telephone operation
Set date
Apply Back
MM DD YYYY
Format
Enter date
01-01-2007
Date and Time
Time
02:41PM
Date
01-01-2007
Alarm
Options Back
Date and Time
Time
02:24PM
Date
01-01-2007
Select Back
Alarm
Set
Hide