Telephone operation, De-register handset – VTech IP8300 User Manual
Page 50
www.vtechphones.com
45
De-register handset
This menu allows you to de-register the handset from the telephone base.
To de-register the handset:
Step 1: Press the
Menu softkey from the idle screen.
Step 2: Press the , , and/or NavKeys to choose
Registration
Settings, and press the Select softkey or center NavKey/SEL/ .
Step 3: Press the up or down NavKey or to choose
Base Settings
then press the
Select softkey or center NavKey/SEL/ .
Step 4: Press the up or down NavKey
or
to choose
De-register
Handset then press the Select softkey or center NavKey/SEL/
. The
Enter PIN screen will be displayed.
Step 5: Use the dial pad to enter the PIN when prompted. Press the left or
right NavKey or to move the cursor to the right of the character
you want to delete and press
REDIAL/REMOVE to delete number
if you make a mistake.
Step 6: Press the
Apply softkey or center NavKey/SEL/ to confirm. The
screen will display all the handset(s) registered to the telephone
base.
Step 7: Press the up or down NavKey or to choose the handset to
de-register from the telephone base and press the
Select softkey
or center NavKey/
SEL/ . The screen will display Handset
successfully de-registered.
The default
system PIN is
0000.
When you enter
the PIN, the digits
will display as
*
symbols on the
screen.
To register a
handset to the
base, see page
42.
��
��
��
Base Setting
Change System PIN
De-register Handset
Clear VMWI
Select
Back
Registration Settings
Handset Settings
Base Settings
Select
Back
Telephone operation
De-register Handset
Enter PIN
Apply
Back
De-register Handset
Handset 1
Handset 2
Handset 3
Handset 4
Select
Back