VTech IP8300 - Manual (Page 49)

www.vtechphones.com 44
Telephone operation
Change system PIN
The system will require you to input the PIN to register or de-register a
handset. The default system PIN is 0000. The PIN must be four digits. To
change the PIN:
Step 1: Press the
Menu softkey from the idle screen.
Step 2: Press the , , and/or NavKeys to choose Registration
Settings then press the Select softkey or center NavKey/SEL/ .
Step 3: Press the up or down NavKey or to choose Base Settings
then press the Select softkey or center NavKey/SEL/ .
Step 4: Press the up or down NavKey or to choose Change System
PIN then press the Select softkey or center NavKey/SEL/ .
Step 5: Use the dial pad to enter the old PIN when prompted. Press the
Apply softkey or center NavKey/SEL/ when you are finished.
Step 6: Use the dial pad to enter the new PIN when prompted. Press the
left or right NavKey or to move the cursor to the right of the
character you want to delete and press REDIAL/REMOVE to delete
number if you make a mistake.
Step 7: Press the down NavKey to move to Confirm New PIN. Use the
dial pad to re-enter the new PIN when prompted. Press the left or
right NavKey or to move the cursor to the right of the character
you want to delete and press REDIAL/REMOVE to delete number
if you make a mistake.
Step 8: Press the Apply softkey to confirm the new PIN and the screen will
display Accept. If the PINs entered in the two boxes are not the
same, PIN does not match! will be displayed.
Change System PIN
Enter OLD PIN
Apply Back
Change System PIN
Enter New PIN
Apply Back
Confirm New PIN
Registration Settings
Select Back
The PIN digits
you enter will
appear as * in the
box.
��
Base Setting
Change System PIN
De-register Handset
Clear VMWI
Select Back
Telephone operation
Base settings
Use this menu to change the system PIN, de-register handset and clear the
voicemail waiting indication (VMWI).