VTech IP8300 - Manual (Page 47)

www.vtechphones.com 42
Telephone operation
Registration settings
Use the registration settings menu when you need to make changes to base
registration, system PIN, de-register handsets and clear the VMWI.
Handset settings
Select a base
If the handset is registered to more than one 8300 base this screen allows
you to choose which base to connect to.
Registration Settings
Handset Settings
Base Settings
Select Back
Registration Settings
Select Back
Telephone operation
Register a handset
A maximum of five handsets can be registered to the same telephone base.
To register accessory handsets:
Step 1: Press and hold
FIND HANDSET for at least 10 seconds on the
telephone base. The VMWI and LINE IN USE lights will blink
alternately indicating that the telephone base is in registration
mode.
Additional
accessory
handsets can
be purchased
separately
and must be
registered to the
telephone base
before use.
Each handset
registered to
the telephone
base will be
automatically
assigned a
number 1-5.
��
��