VTech IP8300 - Manual (Page 57)

www.vtechphones.com 52
Telephone operation
Set alarm
This menu allows you to set the alarm time and turn it on or off. To set the
alarm:
Step 1: Press the
Menu softkey from the idle screen.
Step 2: Press the , , and/or NavKeys to choose Date and Time
then press the Select softkey or center NavKey/SEL/ .
Step 3: Press the up or down NavKey or to choose Alarm then press
the Options softkey.
Step 4: Press the up or down NavKey or to choose Set alarm then
press the Select softkey or center NavKey/SEL/ . The Set alarm
screen will display.
Step 5: Press the left or right NavKey or to choose On for daily
alarm.
Step 6: Press the down NavKey to move to next box to enter the time.
Step 7: Press the left or right NavKey or to move the cursor back and
forth inside the box, and use the dial pad to enter the time.
Step 8: If 12 hour format is chosen in the Set time screen, press the down
NavKey to move to next box to choose AM or PM. Press the left
or right NavKey or to choose between AM or PM.
Step 9: Press the Apply softkey or center NavKey/SEL/ to confirm. The
alarm time will be shown on the Date and Time screen and the
alarm icon will be shown on the idle screen.
Step 10: The screen will display Enter valid value! if you have entered
incorrect information.
Step 11: Press the Back softkey to return to the previous screen.
Date and Time
Select Back
Set alarm
Apply Back
Off
Daily alarm
Enter time
02:05 PM
Telephone operation
�� When the alarm
goes off you can
press the STOP
softkey. This is
a daily alarm so
the alarm will
continue to go off
every day until
you disable the
alarm.
-OR-
When the alarm
goes off you
can press the
SNOOZE softkey
to silence the
alarm for 10
minutes. You
can snooze as
many times as
you want until you
press the STOP
softkey.
Date and Time
Time
03:05
Date
01-01-2007
Alarm Disabled
Options Back
Date and Time
Time
03:05
Date
01-01-2007
Alarm
Select Back
Set alarm
Alam tone