VTech IP8300 - Manual (Page 60)

www.vtechphones.com 55
Change alarm
Use this menu if you have set the alarm before and would like to change the
settings. To reset the alarm:
Step 1: Press the
Menu softkey from the idle screen.
Step 2: Press the , , and/or NavKeys to choose Date and Time
then press the Select softkey or center NavKey/SEL/ .
Step 3: Press the up or down NavKey or to choose Alarm then press
the Options softkey.
Step 4: Press the up or down NavKey or to choose Change alarm
then press the Select softkey or center NavKey/SEL/ . The Set
alarm screen will display.
Step 5: Press the left or right NavKey or to choose between On or Off
for the daily alarm.
Step 6: Press the down NavKey to move to the next box to enter the
time.
Step 7: Press the left or right NavKey or to move the cursor back and
forth inside the box, and use the dial pad to enter the time.
Step 8: If the 12 hour format is chosen in Set time screen. Press the down
NavKey to move to the next box to choose AM or PM. Press the
left or right NavKey or to choose between AM or PM.
Step 9: Press the Apply softkey or center NavKey/SEL/ to confirm. The
alarm time will be shown on the Date and Time screen and an alarm
icon will be shown on the idle screen.
Step 10: The screen will display Enter valid value! if you enter incorrect
information.
Step 11: Press the Back softkey to return to the previous screen.
Set alarm
Apply Back
Off
Daily alarm
Enter time
02:05 PM
Date and Time
Select Back
Telephone operation
Date and Time
Time
03:05PM
Date
01-01-2007
Alarm
11:45AM
Options Back
Time
03:05
Date
01-01-2007
Alarm
Date and Time
Select Back
Change alarm
Disable alarm
Alam tone