Microsoft windows nt or 2000, Microsoft windows 95 or 98 or me, Macintosh – WatchGuard Technologies WatchGuard SOHO and SOHO | tc User Manual
Page 15: Other operating systems (unix, linux)
User Guide 2.3
3
Performing manual installation
Microsoft Windows NT or 2000
1
Click
Start
=>
Programs
=>
Command Prompt.
2
At the C:\ prompt, enter ipconfig/all. Press
Enter
.
3
Enter your current TCP/IP settings in the chart provided
below.
4
Click
Cancel
.
Microsoft Windows 95 or 98 or ME
1
Click
Start
=>
Run.
2
At the C:\ prompt, enter
winipcfg
. Click
OK
.
3
Select the “Etherenet Adapter.”
Enter your current TCP/IP settings in the chart provided below.
4
Click
Cancel.
Macintosh
1
Click
Apple menu
=>
Control Panels
=>
TCP/IP
.
2
Enter your current TCP/IP settings in the chart provided
below.
3
Close the window.
Other operating systems (Unix, Linux)
1
Consult your operating system guide to locate the TCP/IP
screen.
2
Enter settings in the chart provided below.
3
Exit the TCP/IP configuration screen.