Creating a custom incoming service, Adding an incoming tcp or udp service – WatchGuard Technologies WatchGuard SOHO and SOHO | tc User Manual
Page 49
User Guide 2.3
37
Allowing incoming services
7
Click Submit.
The configuration change is saved to the SOHO and the Show Incoming
Rules page appears. The incoming service rules are identified by protocol,
port, and destination on the private network.
Creating a custom incoming service
In addition to the pre-configured services provided by the
WatchGuard SOHO Configuration interface, you can also create a
custom service for a server on your private network. The
limitations on the types of services you can add are as follows:
• Must use network address translation
• Must be a packet-filtering service (you cannot create custom
proxy services)
Adding an incoming TCP or UDP service
1
Using your Web browser, go to http://192.168.111.1.
2
Select Services.
The Services menu appears.
3
Click Allowed Incoming Services. Click Add a Service.
The Add New Incoming Services menu appears.
4
Click Add Other TCP or UDP Service.
The New Port Forward configuration page appears.
5
Use the drop list to select a protocol type: TCP or UDP.
6
Enter the port number range in the port to port fields.
7
Enter the private network IP address of the computer hosting
the service.
8
Enter a name for the service.