WatchGuard Technologies WatchGuard SOHO and SOHO | tc - Manual (Page 54)

Blocking outgoing services
42
6 Click Submit.
The configuration change is saved to the SOHO and the Blocked Service
List page appears.
Removing a blocked outgoing service
At any time, you can reopen a service now required by your network.
You should do this when you seek to open access to a particular type of
outgoing traffic as the removal increases the accessibility for users on
your private network to resources on the Internet. To allow an outgoing
service that you had blocked:
1 Using your Web browser, go to http://192.168.111.1.
2 Select Services.
The Services menu appears.
3 Click Blocked Outgoing Services.
The Blocked Outgoing Services menu appears.
4 Click Remove Blocked Service.
A list of existing, outgoing blocked services appears. Services are
identified by protocol and port number range.
5 Enable the checkbox next to the services you would like to
remove from the list of blocked services.
You can disable blocking for multiple services simultaneously.
6 Click Submit.
The selected services are removed from the list. The list reappears. To
return to the Configuration menu, click Configuration at the top of the
page.