WatchGuard Technologies WatchGuard SOHO and SOHO | tc - Manual (Page 20)

Physically connecting your SOHO
8
6 Turn on the power to your cable or DSL modem. Wait until the
lights stop flashing, indicating that the modem is ready.
7 Attach the power cord to the SOHO and plug it into an outlet.
8 Restart your computer.
9 For information on the factory default configuration options,
see “Default factory settings” on page 24. For specialized
configurations, see “Configuring your public network” on
page 12, as well as, “Configuring your private network” on
page 20.
Cabling the SOHO for more than four computers
While there are only four, local ports (numbered 1-4) on the back of
the SOHO, you can connect many more devices to your SOHO
using network hubs.