Worth Data RF Terminal 7000 - Manual (Page 14)

RF System Setup
The RF Terminal can be configured using the Terminal Setup Menu. Most users do not need to change
anything in the setup. The most commonly changed setup parameters are the Terminal ID (especially if you
have more than 1 terminal) and the Channel (if you are adding an additional Base station).
Factory Default RF Terminal Configuration
Parameter Default Setting Parameter Default Setting
RF Configuration RF Channel - 0 MSI /Plessey Code MSI - OFF
Terminal ID - 0 MSI with 1 mod 10 - OFF
Security code - OFF MSI with 2 mod 10 - OFF
Skip opening screen - OFF MSI with mod 11/mod 10 -
OFF
Control Keys Only - OFF Transmit check digit - 0
Auto Check Back - 00 Plessey - OFF
Codabar Codabar - OFF Code 3 of 9 Code 39 - ON
Full ASCII - ON CLSI format - OFF
Accumulate Mode - ON START STOP Char - OFF
Transmit Start Stop - OFF Code 128 Code 128 - ON
MOD 43 Check Digit - OFF UCC/EAN-128 - OFF
Transmit MOD 43 - OFF Databar / RSS-14 Databar / RSS-14 - OFF
Caps lock - OFF
Decode Option - 0
2 of 5 Code Interleaved 2 of 5 - OFF Code 93 / Code 11 Code 93 - OFF
Check Digit - OFF Code 93 full ASCII - ON
Transmit Check Digit - OFF Code 11 - OFF
Standard 2 of 5 - OFF Code 11 Check Trans - 0
2 of 5 Length - 06 RS-232 I/O Settings Baud Rate - 9600
UPC-A EAN 13
UPC-E EAN 8
UPC/EAN ALL - ON Parity - none
Supplements - OFF Data bits - 8
UPC-A NSC - ON XON/XOFF Printer - ON
UPC-A check digit
transmitted - ON Time & Date Settings Date Format - USA
Year Output – 2 digits
EAN-13 country code
transmitted - ON Shut Down Time – 5 min
Speaker Options Beep Volume - medium
EAN-13 Check - ON Beep Tone - 2
ISBN EAN-13 mode - OFF Voice Volume - medium
UPC-A as EAN-13 - OFF Keypad Tone - ON
UPC-E First Char - OFF Laser Options Double Decode - OFF
EAN-8 First Char - ON 4.5 Second Beam - OFF
UPC-E Check Digit - OFF Aiming Dot Duration – 0
seconds
EAN-8 Check Digit - ON
UPC-E Expanded
Transmission - OFF
LCD Settings 4/6 Line Legacy Mode -OFF
UPC-E1 - OFF Background Color – 1 (black)
Other Bar Code
Options Storage Tek Label – OFF
LabelCode 5 - OFF Text Color – 2 (blue)
LabelCode 4 - OFF Brightness – medium
Barcode IDs - OFF Brightness Timeout – 5 sec
Using the Setup Menu on the RF Terminal
The RF Terminal can be setup via the Terminals' keypad by entering Setup Mode from the menu. Turn on
the Terminal and press any key. You should see the MODE MENU message:
1. - Sign On
2. - Setup
3. - One Way Mode
4. - RF Site Survey
Press the 2 key. The next menu allows you to choose which item to configure:
RF TERMINAL SETUP
RF CONFIGURATION
1
BAR CODE OPTIONS 2
RS-232 I/O SETTINGS 3
DATE & TIME SETTINGS 4